Product Brief - Model C2195A Powerterm PTS 12V/24V 140W Solar Reg/PSU

Powerterm PTS 12V/24V 140W Solar Reg/PSU

picarrow Charging characterised for sealed lead-acid cells.
arrow Operates with up to 140W Solar Panels.
arrow Under-voltage cut-out protects battery from deep discharge.
arrow Series regulator design for best efficiency.
arrow Solar charging output for system monitoring.
arrow DIN Rail mounting.
arrow Temperature compensated battery charging for best standby time and battery
arrow 12Vdc or 24Vdc operation

Powerterm PTS is a combined Solar Regulator, Power Supply system with integrated standby battery management for small solar powered applications. DIN rail mounted accommodating solar panels up to 140W and characterised for sealed lead acid batteries.


The Powerterm PTS is a combined Solar Regulator and Power Supply system with integrated standby battery management for small solar powered applications.

Just connect a solar panel, sealed lead acid battery and load for an industrial grade solar powered system.

This DIN rail mounted product is ideal for providing dc power to Teleterm M2-series RTU systems when mains power is not available. Applications include RTUs, data-loggers, remote monitoring, and alarm systems.

Under-voltage Cut-Out

In the event of complete discharge of the battery, an under-voltage cut-out disconnects the load preventing the battery entering its "deep" discharge phase, which can cause irreparable damage to the battery, and reduce its capacity and life.

Fault Protection

Batteries are capable of delivering very large currents under system fault conditions that can damage wiring and equipment. The PTS incorporates an auto-resettable load cut-out, which disconnects the load under over-current fault condition.

Charge Control

The PTS controls the charging of the battery to ensure optimum life. When the battery is fully charged, the PTS will disconnect the solar panel to prevent overcharging.

System Monitoring

The PTS provides a Charge detect output. When the solar panel is connected and charging, this output is on. This output can be used to detect solar panel or charger failure, or to measure actual charging hours.

12/24V Selectable

The PTS can be used in 12V or 24V applications. The PTS can be switched to the correct battery voltage and adjusts the solar regulator and low voltage cut-out accordingly.

Temperature Compensation

In outdoor environments, the ideal battery voltage will vary with temperature. The PTS has a temperature sensor that compensates for changes in ambient temperature to keep the battery at its optimum.

Further Literature 
Full specifications and Order Information
Ask for Support
Send a request to our Technical Support Staff


Request a Quote
Send a request for quote to our Sales Staff