Product Brief - Model C1423A-1 RS232/485 SERIAL I/F BOARD

Omni10C Serial Interface Board

picarrow Serial Interface (RS232/485) for Omni10C Annunciators
arrow Modbus Protocol - Slave
arrow Optional RTU or ASCII Modes
arrow Selectable Baud Rate
arrow Default Mode for easy access
arrow RS485 Address set on "DIP" switch


Omni10C Serial Interface RS232/485 using Modbus protocol(Slave). Fitted into Omni10C annunciators when a serial port interface is required.


The Modbus serial Interface options board allows the annunciator to become a Modbus slave device on RS232 or RS485 communications network.

This enables Omni10Cs to receive inputs serially instead of hardwired or for other serial devices to access the hardwired input status via the serial port. 

Up to 15 Omni10Cs be multi-dropped on an RS485 port and all data transmitted or acquired serially.

The serial Interface allows the annunciator to be used in a complimentary role with PLCs or SCADA. Using Modbus communication critical alarms can be routed from the SCADA to Annunciator forcing operator intervention as well as external audible and visual indication of alarms. In a similar way a PLC can be offloaded from the task of processing alarms by routing this function to the annunciator.

Further Literature 
Datasheet
Full Specification and Ordering Information.
RoHS Compliance Certificate
RoHS Compliance Certificate with a list of RoHS Compliant Products
Ask for Support
Send a request to our Technical Support Staff
 

Help

Request a Quote
Send a request for quote to our Sales Staff
 

Buy