Product Brief - Model C2177B-1 Powerterm PT5000C 12Vdc 5A PSU/Battery Charger

Powerterm PT5000C PSU&Chrgr AC; 12V5A

picarrow Dual-mode SLA battery charging
arrow Under-voltage cut-out to protect battery
arrow Temperature compensated
arrow Over-current limited
arrow AC Detect output


Powerterm PT5000C 85-264Vac. 12Vdc 4A Load/1A charge Battery Backed instrument power supply/charger. DIN Rail or surface mount QTY Discount 10-24 less 5% , 25 upward less 10%.


The PT5000C is a combined Power Supply and Battery Charger system with integrated standby battery management ideally suited for small uninterruptable instrument supply applications.

Just connect mains supply, standby battery and load for an industrial grade standby power supply system.

This DIN rail mounted product is ideal for providing dc power to instrument systems where battery backup is necessary to ensure continuous system operation during power failure.

Applications include RTUs, dataloggers, remote field instruments, alarm systems and access controllers.

Managing battery-backed systems for optimum backup time and battery life can be tricky and expensive. This product incorporates many features that make installing such systems simple and foolproof.

Batteries are capable of delivering enormous currents under system fault conditions that can damage wiring and equipment. The PT5000C incorporates a load cutout, which disconnects the load under over-current fault condition to protect system wiring.

During prolonged power outages, the back-up battery will eventually discharge. If the load remains connected, the battery enters its deep discharge phase, which can cause irreparable damage to the battery, and reduce its capacity and life. The PT5000C incorporates an undervoltage cutout that disconnects the load when the battery voltage begins to fall.

In locations prone to large temperature variations, such as outdoor mounted enclosures, the optimum charge voltage on the battery changes significantly. The PT5000C is equipped with an optional temperature sensor input for compensation to ensure that the battery is not over-charged or under-capacity across a wide operating temperature range.

This product is well proven in RTU and remote standby applications exposed to harsh environments.

Further Literature 
Datasheet
Full specifications and Order Information
Technical Note
Technical information on battery selection and charging
Installation Guide
Details of installation requirements and further specifications
Declaration of Conformity
Compliance Specifications
RoHS Compliance Certificate
RoHS Compliance Certificate with a list of RoHS Compliant Products
Related Products
 Similar Power Products
See the complete range of POWERTERM power products available in varying sizes and for applications.
 Powerterm C2177 PSU/Charger
Combined Power Supply Battery Charger for 12 or 24Volt systems with loads up to 4Amps
 Powerterm C2197 PSU/Charger Dual Voltage Charger
Combined Power Supply & Battery Charger for applications requiring both 12V and 24V loads
Ask for Support
Send a request to our Technical Support Staff
 

Help

Request a Quote
Send a request for quote to our Sales Staff
 

Buy