Web Based Remote Monitoring
Reliable Web based solutions for monitoring the condition or status of remote assets no matter where you or they are located.
Read more...
|
Maxiflex Process Automation and RTU's |
|
|
|
|
|
Model Number |
Description |
Details |
|---|---|---|
| C1467B-10 | Maxiflex 32SOE Cable 10m DB37 Connectors Maxiflex 32 channel SOE Module 10 meter Multicore Field Input Cable with DB37 connectors fitted. Interface to C6332A Terminal input board. To specify other lengths use the code C1467-X where x is length of cable |  |
| C1467B-2 | Maxiflex 32SOE Cable 2m DB37 Connectors Maxiflex 32 channel SOE Module 2 meter Multicore Field Input Cable with DB37 connectors fitted. Interface to C6332A Terminal input board. To specify other lengths use the code C1467-X where x is length of cable | |
| C1467B-3 | Maxiflex 32SOE Cable 3m DB37 Connectors Maxiflex 32 channel SOE Module 3 meter Multicore Field Input Cable with DB37 connectors fitted. Interface to C6332A Terminal input board. To specify other lengths use the code C1467-X where x is length of cable | |
| C1467B-5 | Maxiflex 32SOE Cable 5m DB37 Connectors Maxiflex 32 channel SOE Module 5 meter Multicore Field Input Cable with DB37 connectors fitted. Interface to C6332A Terminal input board. To specify other lengths use the code C1467-X where x is length of cable | |
| C1468A | Maxiflex SOE Time Sync Network Cable Maxiflex Time Synchronization Cable Multicore DB9 fitted both ends. 500mm length. Fitted between Mx Master and Slave bases for Time synchronisation of SOE modules. | |
| C1469A | Maxiflex SOE Time Sync Network Trmntr Maxiflex Time Synchronization Terminator DB9 connector. CANBus Network Termination for Time synchronisation network. One Per each end of time sync network. | |
| C2306B | Maxiflex GPS Time Synchronisation Module The C2306B Time Synchronisation Module sensor is used to provide high accuracy time synchronisation in Maxiflex Sequence-Of-Event (SOE) and PLC applications | |
| C6174B | RS485 Termination Board RS485 Termination Board. DIN Rail. Used for Line Termination and to facilitate T-offs from RS485 communications network. | |
| C6332B | Maxiflex 32SOE IP to DB37 & Ribbon TB Maxiflex 32 Channel SOE Input Terminal Board. Used with Maxiflex SOE Modules M1760/1. Comprises 32 Inputs Terminal Board 24V, DB37 outputs to Maxiflex SOE Modules and ribbon header outputs to Annunciators, Using cables C1467B-2 and C1432-x respectively | |
| M1001A | Maxiflex 2 I/O Master Base No Expansion Maxiflex 2I/O Master Base for PSU, CPU and any 2 I/O Modules. Not expandable to expander base. | |
| M1021B | Maxiflex 3 I/O Master Base (Expandable) Maxiflex 3I/O Master Base for PSU, CPU and any 3 Mx I/O Modules. Expandable to M1031/2 expander bases using cable M1811A. | |
| M1022B | Maxiflex 7 I/O Master Base (Expandable) Maxiflex 7I/O Master Base for PSU, CPU and any 7 Mx I/O Modules. Expandable to M1031/2 expander bases using cable M1811A. | |
| M1023B | Maxiflex 5 I/O Master Base (Expandable) Maxiflex 5I/O Master Base for PSU, CPU and any 5 I/O Modules. Expandable to M1031/2 expander bases using cable M1811A. | |
| M1031B | Maxiflex 5 I/O Expander Base Maxiflex 5 I/O Expander Base for any I/O modules. No extra PSU module required. | |
| M1032B | Maxiflex 8 I/O Expander Base Maxiflex 8 I/O Expander Base for any I/O modules. Separate PSU module required for this base. | |
| M1104C | Maxiflex 48Vdc Logic/Field PSU Maxiflex DC LF Power Supply. 48Vdc input supply with logic supply (5V and 12V) to Maxiflex base and an isolated field supply 24Vdc 1A (for field loops) | |
| M1151C | MX 110/220Vac/dc Logic/Field PSU Maxiflex AC Logic/Field Power Supply. 110/220Vac/dc input supply. Logic power outputs for base and isolated 24Vdc 1A field supply (for loops). | |
| M1241B | Maxiflex CPU T2 Serial Port, Conet/c Port Maxiflex T2 CPU-C with Serial Port, Program Port, Conet Port. Programmable in Ezi Forth and Ezi List. Order M1831A programming cable if required. | |
| M1249A | Maxiflex R3c Remote I/O Scanner Maxiflex Remote I/O Scanner fitted to remote I/O Racks in CPU Slot. Used with M1593A Remote I/O controller fitted in any I/O Slot on the Controller Rack with up to seven Maxiflex remote I/O Bases connected to the Maxiflex Master Controller Base. | |
| M1261F | Maxiflex CPU P3c Conet/c port Maxiflex P3c CPU-C with Serial Port, Program Port, Conet Port. Programmable in five ISaGRAF IEC61131 languages. Order M1831A programming cable if required. Includes TSM support. | |
| M1262G | Maxiflex CPU P3e Ethernet Port Maxiflex P3e CPU with Serial Port, Program Port, Ethernet Port. Programmable in five ISaGRAF IEC61131 languages. Order M1831A programming cable if required. Includes TSM support. | |
| M1264A | Maxiflex CPU A3c Maxilarm Conet/c port Maxiflex A3c Maxilarm CPU with Serial Port, Program Port, Conet Port. Programmable in Isgraf IEC61131. | |
| M1267C | Maxiflex CPU P3e-R Redundant Controller Maxiflex P3e-R CPU with Serial Port, Program Port, Ethernet Port and Sync Link Port. Programmable in five ISaGRAF IEC61131 languages. Order M1831A programming cable if required. Includes TSM support. | |
| M1272A | Maxiflex P4D Dual Redundant PLC CPU Maxiflex P4D Dual Redundant Programmable Logic Controller CPU Module with Program Port, 2 x Serial Ports, Ethernet Port, SD card and Sync Link. Programmable in five IEC61131-3 languages. | |
| M1321A | Maxiflex 8DI-C Contact IP Full Isolation Maxiflex 8DI-C module. 8 Potential-free contacts or contacts with up to 200Vdc across them. Full isolation between channels. 1 input/common. | |
| M1322A | Maxiflex 16 Dig In (9-30Vdc) Maxiflex 16 DI 24V module. 16 channel digital inputs (9-30Vdc). Nominal 24Vdc. Positive or negative common. 8 inputs/common. | |
| M1323A | Maxiflex 16 Dig In (30-60Vdc) Maxiflex 16 DI 48V module. 16 channel digital inputs (30-60Vdc). Nominal 48Vdc. Positive or negative common. 8 inputs/common. | |
| M1326B | Maxiflex 32 Dig In (18-30Vdc) Maxiflex 32 DI 24V module. 32 channel digital inputs (18-30Vdc). Nominal 24Vdc. Positive or negative common. 16 inputs/common. Requires 2 off Fastrak Field Terminal Board C632X and Ribbon Cables | |
| M1327A | Maxiflex 64 Dig In (18-30Vdc) Maxiflex 64 DI 24V module. 64 channel digital inputs (18-30Vdc). Nominal 24Vdc. Positive common. 16 inputs/common. Requires 4 off Fastrak Field Terminal Board C632X and Ribbon Cables | |
| M1330A | Maxiflex 8 Dig In (9-30Vdc) 8 Relay Out Maxiflex 8DI8RO Module. 8x 9-30Vdc Digital Inputs 8 Relay Output (shared common). | |
| M1341B | Maxiflex 16 Dig Out Logic Isolation Maxiflex 16DO module. 16 channel Digital Output. Open-collector transistors. Terminals and Ribbon outputs. 5-80Vdc, 200mA per channel. 8 outputs/common. | |
| M1342A | Maxiflex 32 Dig Out Logic Isolation Maxiflex 32DO module. 32 channel Digital Output. Open-collector transistors. Ribbon Header outputs. 18-30Vdc, 100mA per channel. 16 outputs/common. Requires 2 Off Fastrak Field Terminal Board C632X and Ribbon Cables | |
| M1372A | Maxiflex 8 Relay Output 5A 250Vac N/O Maxiflex 8RO module. 8 N/O relay contacts. 5A 250Vac. Full isolation between channels. 1 output/common. | |
| M1403A | Maxiflex 16 Analog In (4-20mA) 0V Comm Maxiflex 16AI module. 16 channel analog input. Various volt and current ranges. 8 inputs/common -ve. | |
| M1412A | Maxiflex 8 Analog Out (4-20mA) 0V Comm Maxiflex 8AO module. 8 channels analog out (4-20mA). Individual common -ve terminals, commoned internally. | |
| M1431B | Maxiflex 8 Channel Isolated VC Input Maxiflex 8 channel ISO VC input module. Inputs may be mixed i.e V or I, current inputs require an external sense resistor. Each channel can have 4 Setpoints High, High High, Low, Low Low and deadband set in config download. | |
| M1432C | Maxiflex 8 Channel Isolated TC/mV Input Maxiflex 8 channel ISO TC/mV input module. Supports Type E,J,K,T,N,B,R,S Thermocouples.Input range and TC type may be different for each channel. Each channel can have 4 Setpoints High, High High, Low, Low Low and deadband set in config download. | |
| M1433B | Maxiflex 6 Channel Isolated RTD Input Maxiflex 6 channel ISO RTD input module. Supports Pt100 and Ni120 STD. Input range and RTD type may be different for each channel. Each channel can have 4 Setpoints High, High High, Low, Low Low and deadband set in config download. | |
| M1434E | Maxiflex 8AI Individual Isolated Inputs The M1434 8AI ISO 8 channel analogue input module provides 8 fully isolated voltage (1-5V) inputs | |
| M1436A | Maxiflex 4 off Isolated 4 Wire RTD Input Maxiflex 4 channel ISO 32 bit precision 4 Wire RTD input module. Supports Pt100 STD. Range -115 to 327C. | |
| M1438A | Maxiflex 8 Channel Hart Input Module 8 Independant Channel Hart NIM for Inteface to HART enabled devices to send and retrieve data | |
| M1580A | Maxiflex Dual Serial NIM Maxiflex Dual Modbus NIM. 2 Independent RS232/485 ports isolated. Supports Modbus Master, Modbus Slave and Conet/s. Programmable for other custom protocols. | |
| M1586A | Maxiflex Conet PNIM Maxiflex Single Programmable Conet NIM. Single Conet Port isolated. | |
| M1588D | Maxiflex Canberra Harwell NIM Maxiflex NIM for interface to Canberra Harwell AB96, iCAM and G64 radiological monitors. A mixture of up to 32 of these Harwell monitors types may be accommodated on a single RS485 multidrop network. (Supersedes M1587 AB 96 NIM) | |
| M1589D | Maxiflex Dual Hart NIM Dual Hart NIM for Inteface to HART enabled devices to send and retrieve data | |
| M1591B | Maxiflex Ethernet NIM, Modbus,Forth Prog Maxiflex Single Programmable ETHERNET NIM. Single UTP Port; single TCP/IP connection. Modbus Serial over Ethernet or Modbus/TCP Slave Protocol support. Programmable in Forth only. | |
| M1592A | Maxiflex Serial NIM Maxiflex Network Interface Module with one isolated RS232/485 Serial Port. Supports Conet/s, Modbus (Master/Slave; ASCII/RTU), or custom protocol (implemented in EZIFORTH programming language on the module). NB! USED AS REPLACEMENT FOR M1585 NIM | |
| M1593A | Maxiflex RIOc Remote I/O Link, Conet The M1593A Remote I/O Conet Link (RIOc) Module allows up to three Maxiflex remote I/O Bases to be connected to a Maxiflex Master Base. In addition, it can be used in redundant Maxiflex remote I/O and control applications. | |
| M1594A | Maxiflex Redundant I/O Link, Ethernet The M1594A Redundant I/O Ethernet Link Module designed specifically for redundant remote I/O and control applications, where high availability is required in hot standby configurations. It is used in conjunction with the M1267B (P3e-R) CPU module | |
| M1595A | Maxiflex Standard Ethernet NIM The M1595A Standard Ethernet NIM provides an additional Ethernet Network Connection to Maxiflex system. It also acts as a Remote I/O Scanner and allows connection up to 7 Maxiflex remote I/O Bases via Ethernet, ISaGRAF Ready; order CC030A-URTT to activate | |
| M1701A | Maxiflex Dummy Module Maxiflex Dummy Module. Used to blank unused I/O slot on base. Contains no pcb. | |
| M1711A | Maxiflex 4 Channel High Speed Counter Maxiflex 4 Channel High Speed Counter Module. : Up to 200kHz. | |
| M1712A | Maxiflex 8 Channel High Speed Counter Maxiflex 8 Channel High Speed Counter Module. Channels 1-7: up to 1kHz. Channel 8: up to 10kHz. | |
| M1713A | MX MP - METER PROVER MODULE The Maxiflex Meter Prover Module is used in meter proving systems for Petroleum Measurement The Mx MP Module uses (PulseInterpolation) a method of "double-chronometry" for increasing the resolution of flow metering pulses when proving meters. | |
| M1713B | MX 4PI 4 CH FLOW METERING PULSE INTEGRITY MODULE The Maxiflex 4PI Module is used to monitor dual inputs from up to four flow meters and to detect and correct errors in the input pulse streams. The module is designed to achieve the functionality of Level A security requirements of specification ISO 6551 | |
| M1714B | MX MP METER PROVER MODULE The Maxiflex Meter Prover Module is used in meter proving systems for Petroleum Measurement The Mx MP Module uses (Pulse Interpolation) a method of "double-chronometry" for increasing the resolution of flow metering pulses when proving meters. | |
| M1760A | Maxiflex 32SOE Inputs,9-30Vdc Maxiflex 32 Channel Sequence Of Events Recorder Module. Accepts Potential Free contacts and 9 to 30Vdc. Date and Time Stamps sequence of events to 1millisecond resolution. Requires Field termination board C6332B and Interface cable C1467B | |
| M1761A | Maxiflex 32SOE Inputs,30-60Vdc Maxiflex 32 Channel Sequence Of Events Recorder Module. Accepts Potential Free contacts and 30-60Vdc. Date and Time Stamps sequence of events to 1millisecond resolution. Requires Field termination board C6332B and Interface cable C1467B | |
| M1811A | Maxiflex Expander Cable 400mm Maxiflex Expander cable. 400mm. For use between Master and Expander Bases. | |
| M1821A | Maxiflex Base 19" Mounting Adapter Plate Maxiflex 19 Inch Mounting Adapter for Maxiflex Bases. Caters for 3, 5, 7 I/O Master Bases 5 and 8I/O expanders. | |
| M1831B | Maxiflex Programming Cable Maxiflex CPU Programming Cable. RS232 Male DB9 connector (PC end) to RJ25 (CPU end). 2 metres. | |
| M1832A | Maxiflex Conet Patch Cable Maxiflex Conet Patch Cable. Male DB9 connector (CPU end) to loose ends. 2 metres. Use to connect CPU to C6169 Conet Terminator. | |
| M1833A | Maxiflex RS232/485 Serial Cable General Purpose Maxiflex Serial Cable. RS232/485 Female DB9 connector (CPU end) to loose ends. 2 metres. Note: Cable not compatible with M121X CPUs Specify RS232 or RS485 | |