OMNITERM THT FREQUENCY INPUT DUAL TRIP ALARM AND RE-TX

  Accepts pulses from NAMUR prox switches, NPN/PNP transistors, contacts and
  Two Independant Trip Relay Outputs
  24Vdc Powered
  0 to 20mA; 0 to +-10Volts; 0 to +-10mA; or pulses out

Omniterm THT Frequency Input Transmitter with 2 Software Settable Limit Alarms/Trips/Re-transmit (24Vdc Powered)

OVERVIEW

The Omniterm THT is a universal frequency input transmitter and dual trip amplifier, combining all the features of the Omniterm THZ FrequencyTransmitter and TTP dual Trip Amplifier in a single product.

Use the THT where you need both a frequency monitor as well as two alarm/trip setpoints from a single frequency input.

The THT directly accepts NAMUR proximity switches, contacts, transistors, and tacho signals (user configurable). 

This instrument uses easy software configurability without the need for any calibration to set any input and output signal type and range. Setpoints are set directly in engineering units using the same software configuration tool.

BENEFITS

• Reduce stockholding by only needing to hold one type in stock
• No field calibration means lowest ranging, installation and commissioning costs.
• Software configuration means range settingcan be done in minutes, an configuration can be stored for effective asset management.

PART OF THE FULL RANGE

The Omniterm TXB is part of the latest Omniterm range of signal conditioning modules.
See the full range here