OMNITERM TTP UNIVERSAL INPUT DUAL TRIP ALARM

  Two Independant Limit Alarms with Relay Outputs
  250Vac (30Vdc) 5 Amp Contact rating
  Universal Inputs TC,mV,RTD,V,C
  24Vdc Powered
  DIN Rail Mounting
  Normally Energised or De-enegised relays
  Full Set-up via configuration software
  Change-over contacts on relays

Omniterm TTP Universal Input with 2 Software Settable Limit Alarms/Trips (24Vdc Powered)

OVERVIEW

Use the Omniterm TTP Dual Trip Amplifier to monitor any dc instrumentation signal, including thermocouples, resistance bulbs, mVolts, Voltage and Current; and output two high or low alarms/trips via Form C output contacts.

This instrument uses easy software configurability without the need for any calibration to set any input signal type and range. Setpoints are set directly in engineering units using the same software configuration tool.

BENEFITS

• Reduce stockholding by only needing to hold one type in stock
• No field calibration means lowest ranging, installation and commissioning costs.
• Software configuration means range settingcan be done in minutes, an configuration can be stored for effective asset management.

PART OF THE FULL RANGE

The Omniterm TTP is part of the latest Omniterm range of signal conditioning modules.
See the full range here