OMNITERM LPD DUAL CHANNEL LOOP POWERED ISOLATOR

  Isolate any instrument current loop to 1500Vac
  Powered by the current loop
  Load independent – no field calibration required
  Ultra-Low volt drop <3 Volts at 20 mA (2,5V Typica
  High load capability (1 kohm)
  Dual channel for high density applications
  Reverse polarity and overload protected

Omniterm LPD. Dual Loop powered (4-20mA) Isolator that provides 1500Vrms isolation on any current loop. Ultra Low Volt drop on input <3V. with independent channels in a single 22.5mm wide housing.

The OMNITERM LPD  is a dual loop powered isolating current repeater specifically designed to isolate instrument current loops from circulating ground currents that can cause system inaccuracies, or at worst, instrument failure. Insert in any 4-20mA current loop to isolate the instruments in the loop. Each channel of the LPD is completely separate and isolated from the oher.

The current applied to the input of a channel is repeated on the isolated output, and the load present on the output is reflected back to the input. No separate power source is required.

Forming part of OMNIFLEX’s extensive OMNITERM range of industrial instrumentation, the OMNITERM LPD is designed to be DIN rail mounted, and is 22.5mm wide.

For single channel applications consider the single version Omniterm LPI (model C2063)