OMNISET PRO README.TXT ====================== Installation instructions for Omniset Pro Download the Omniset Pro Installation file from the website. The software will download as a single ZIP file, which you should save to a convenient location on your hard drive. 1. Go to our website www.omniflex.com and register if not already registered. 2. Login with your new username and password. 3. Download the Omniset software from the Omniset page. 4. Do NOT shutdown your browser, because you need to be logged in to register the software in a later step. 5. Install the Omniset Software by double-clicking the downloaded OSetPro.ZIP file and double-clicking on the IOSPro installation file in the folder. Follow the prompts. Make sure software is run in "Administrator mode" for Windows 7 and Windows 10. 6. Run the Omniset software (Start>All Programs>Omniflex>OSetPro) 7. You will need to enter the registration details in the "Help"menu under "Register". 8. Successful registration will be confirmed once the correct registrationdetails are entered. 9. Omniset then needs to know the serial port you wish to use for programming: Select “Options>Port Settings…” from the menu. Enter your serial port number into the first box “Serial Port (1-255)”. 10. The last thing to do is to update your template library to the latest from our web site. Select “File>Update Template Library from web…” from the menu to download the latest template library. 11. You are now ready to go. To connect to a product, the easiest way is to plug the serial cable into the product and then select “File>Connect…” from the menu. For more information on using Omniset please refer to the included Omniset Help.