EASYBUILDER PRO README.TXT
==========================

Installation instructions for EasyBuilder Pro.

Download the EasyBuilder Pro software from the website. 
The software will download as a single WinZip file, which
you should save to a convenient location on your hard drive.
Extract the WinZip file.

1.  Go to our website www.omniflex.com and register if not already registered.
2.  Login with your new username and password.
3.  Download the EasyBuilder Pro software from the EasyBuilder Pro page.
4.  Install the EasyBuilder Pro Software by double-clicking the AutoRun.exe file, and follow the prompts.
5.  Run the EasyBuilder Pro software (Start>All Programs>EasyBuilder Pro>EasyBuilder Pro)
6.  HMI supports downloading/uploading projects via USB cable. After installing EasyBuilder Pro,
     please go to [Computer Management] » [Device Manager] to check if the USB driver is installed, if not,
     please install it manually.
7)   Configure Settings:
      Select target HMI Size and Resolution,
      Select PLC Type and set communications parameters. 
8)   Build Graphics Screens:
      Add Graphic Objects to the screens,
      Link data items and navigation functionality,
      Test via simulation to ensure design goals are met.
9)   Download and Test:
      Build download files and download to target via USB, SD Card or Ethernet,
      HMI starts automatically and application is live.
 
For more information on using EasyBuilder Pro, please download the Easy Builder Pro User Manual from the website.